Sonax Perfect Finish and Cutmax Combo

4.8 (543) · $ 34.50 · In stock

Achieve professional results with Sonax Perfect Finish and Cutmax Combo - 1 Liter Polish and Compound. Flexible, high-quality formula for a hologram-free finish. Available at TCG Detailing Combos.
Sonax Perfect Finish and Cutmax Combo | 1 Liter Polish and Compound Based on extensive test results, SONAX Perfect Finish is by far, one of the most flexible compound/polishes. Works equally as well on German clear coats, Asian OEM clear coats & domestic paint finishes. Perfect Finish was developed for single step polishing of sanded paint defects such as dust inclusions or paint runs. It removes marks of P2000 grit or finer. Innovative paintwork finishing polish provides an initial deep cut, then diminishes to a high gloss, resulting in a hologram-free paint surface. Silicone-free. Directions for use:Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad. . Polish the surface at a low rotatinf speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth.Please note:Do not allow polishing area to overheat. Regularly clean polishing sponges. Never use different polishes on one sponge, Keep from freezing.Product Size:1000ml (33.8 FL OZ) SONAX Profiline Cutmax - Cutting Compound 1000ml SONAX CutMax is designed to achieve the highest cutting and polishing results without severely damaging the clear coat. Sanded areas up to P1500 can quickly and safely be removed with excellent gloss effect. SONAX CutMax is water-based which offers a long working window and will not dry out like other compounds. It is also dust-free for easy clean up after use. Simply wipe off the polished area. Solvent-free & silicone-free makes it safe for use in body shops and collision centers. Directions for use:Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad. . Polish the surface at a low rotating speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth.Please note:Do not allow polishing area to overheat. Regularly clean polishing sponges. Never use different polishes on one sponge, Keep from freezing.Product attributes:Highly abrasive compound paste for sanded and severely weather paint workCapable of removing sanding marks of up to P1500Water-based formula contains no solvents, silicones or petroleumNo dust is created during the compounding process; polishing pads stay cleaner longerProduct Size:1000ml (33.8 FL OZ)